Snorkel M1230E Bedienungsanleitung Seite 18

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 20
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 17
Page 14Operation Manual
SPECIFICATIONS
ITEM M1230E
Platform Size 74cm x 96cm (29 in. x 38 in.)
Maximum Platform Capacity 227 kg (500 lbs.)
Maximum Number of Occupants 2 People indoors/1 person outdoors
Height
Working Height 5,6 m (18 ft.)
Maximum Platform Height 3,63 m (11 ft. 11 in.)
Minimum Platform Height 48,3 cm (19 in.)
Dimensions
Weight 780 kg (1720 lbs.)
Overall Width 76 cm (30 in.)
Overall Height 165 cm (65 in.)
Overall Length 1,36 m (53.5 in.)
Drive Speed
Platform Lowered 3,2 km/h (1.99 mph)
Platform Raised 0,65 km/h (0.46 mph)
Energy Source 24V battery pack
Four 220 ampere hour, 6 Volt batteries, min. wt. 26,3 kg (58 lbs.) each
4 HP DC electric motor
System Voltage 24 VDC
Battery Charger 20 AMP, 220 V AC 50Hz
Battery Duty Cycle 25% for 8 Hours
Hydraulic Reservoir Capacity 7,2 L (1.9 gal)
Maximum Hydraulic System Pressure 165 bar (2400 psi)
Hydraulic Fluid
Normal above 32° F [0° C] ISO #46
Low Temp. below 32° F [0° C] ISO #32
below 0° F [-17° C] ISO #15
Lift System One Single Stage Lift Cylinder
Drive Control Proportional
Control System Proportional Control Handle with Interlock, Selector Switch, Red
Mushroom Emergency Stop Switches
Horizontal Drive Dual Front Wheel
Tires 30,5 cm (12 in.) diameter solid rubber, Non-marking
Parking Brakes Dual, Spring Applied, Hydraulic Release
Turning Radius 37 cm (14.5 in.) Inside
Maximum Gradeability 14º (25%)
Wheel Base 97,8 cm (38.5 in.)
Guardrails 1,10 m (43 in.)
Toeboard 152 mm (6 in.)
Max Chassis Inclination 1.5° Side to Side
2.0° Front to Back
Wheel loading 325kg per wheel / 716.5 lbs per wheel
Vibration of this machine does not exceed 2.5m/sec
2
Sound Pressure Level 68dB (A) at Control Station
Operating Temperature Range -20° C to +50° C
*Specications are subject to change without notice. Hot weather or heavy use may affect performance.
Refer to the Service Manual for complete parts and service information.
This machine meets or exceeds all applicable CE and GS machinery directive requirements.
Specications
Seitenansicht 17
1 2 ... 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare