Snorkel MB26J Bedienungsanleitung PDF herunterladen (Seite 16)

2. Operation & Specications

2 - 6

14. FINAL PREPARATION Congure the masts and jib to the stowed position. Replace all

machine covers and secure.

NOTE: The machine is now ready for Operation or Transportation.

2.4 OPERATION OF THE PLATFORM CONTROLS

The primary (Upper) control box is permanently tted to the front of the platform. It features

a multi-use joystick which provides proportional control for all the machines functions.

That includes, raising or lowering the mast, raising or lowering the jib, rotating the mast

assembly, and also to drive and steer the machine.

A safety Interlock Switch or ‘deadman button’ is incorporated into the Joystick. It must be

activated at all times in order to operate any function. This feature allows for one-handed

operation.

The secondary (Lower) control box is tted to the mast cover at arm level. It features an

enable button and selector buttons to provide pre-programmed speeds for all functions

except drive and steering. This control station is used primarily for service-type operations

including pre-operation inspection. It should never be used to position a manned or un-

maned platform.

NOTE: It may be used in the event of emergency to lower the manned platform.

The issue of reduced speed while elevated and deployment of

the pothole protection bars is crucial to the safe operation of this

machine.

The machine may not be released or operated unless these functions

operate properly.

W A R N I N G

NEVER operate the machine from the upper controls until

the platform entrance drop-bar is in the fully lowered position

and the safety harness is tted.

W A R N I N G

TO TURN THE MACHINE ON

Turn the key switch on the lower controls panel to platform controls or lower controls as

required, the overload warning lamp on the platform control box will ash for 2 seconds and

the buzzer will sound twice conrming that the overload sensor has booted up.

CONTROLS AND INDICATORS

The pre-operation safety checks should be carried out prior to operation. These checks are

detailed in the previous section. Operators who follow these guidelines will become familiar

with the controls and indicators on the machine.

This section summarises the controls and indicators in tabular form and provides more

detailed information.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Keine Kommentare

Snorkel MB26J Bedienungsanleitung Seite 16