Snorkel S3246 CE Bedienungsanleitung PDF herunterladen (Seite 26)

Chapter 8 – Prestart Inspection

22 S2646/3246 – 0410063EE

When inspecting or servicing the aerial platform with the

platform raised, use the following procedure to properly

position the safety prop.

1. Remove all tools and material from the platform.

2. Using the lower controls, raise the platform until the

open height between the arm pins is wide enough to

position the safety prop. Refer to Figure 8.4.

3. Swing the safety prop downward from the storage

position to the support position.

4. Remove hands and arms from the scissors structure

area.

5. Lower the platform until the scissors are supported

by the safety prop.

Use the following procedure to stow the safety prop.

1. Using the lower controls, raise the platform until the

open height between the arm pins is wide enough to

move the safety prop.

2. Swing the safety prop up to the stowed position.

Cables and Wiring Harness

Inspect all cables and wiring for wear and/or physical dam-

age such as loose connections, broken wires, and frayed

insulation. Check the wiring in areas where a change in

routing direction may cause them to become pinched (re-

fer to Figure 8.5). Make sure the cables and wires are

properly routed to avoid sharp edges, pinching, and scuff-

ing.

Figure 8.5 – Cables and Wiring Harness

Figure 8.3 – Battery Charger

4. Unplug the charger.

Safety Prop

Using the lower controls, raise the platform until the open

height between the arm pins is wide enough to position

the safety prop. Refer to Figure 8.4.

Figure 8.4 – Safety Prop

Swing the safety prop downward from the storage posi-

tion to the support position. Inspect the safety prop for

damage and deformation.

Always use the safety prop when the platform is raised

during inspection and maintenance.

ADanger

Pinch points exist on the scissors structure. Death

or serious injury will result if the scissors structure

drops onto personnel working within the scissors

arms or under the raised platform. Properly posi-

tion the safety prop before reaching through the

scissors structure.

Safety Prop

Cables and Wiring

Ammeter

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Snorkel S3246 CE Bedienungsanleitung Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Spezialmaschinen Snorkel S3246 CE