Snorkel S3246 CE Bedienungsanleitung PDF herunterladen (Seite 31)

Chapter 8 – Prestart Inspection

S2646/3246 – 0410063EE 27

Inspect the handles and pins (refer to Figure 8.18) to

ensure that they operated properly and secure the exten-

sion deck. Hold the handles downward to release the

pins and to extend the platform. Extend the platform while

checking for proper operation.

Figure 8.18 – Platform Extension Handle

Extend the platform and inspect the weldments for defor-

mation and damage. Visually check the platform welds

for cracks.

Swing-Down Rails

Inspect the pins that hold the rails in position (refer to

Figure 8.19) to make sure they are in place and are not

deformed. There is one pin on each vertical side rail, the

entry gate, the front panel and one that fastens the upper

controls to the platform rails.

Figure 8.19 – Swing-Down Rails Pin

Brakes

Test the operation of the brakes while operating the aerial

platform from the upper controls.

The brakes are engaged when:

• the joystick interlock is released.

• the drive/lift selector switch is in the lift position.

• the emergency stop button is pushed down.

Placing the drive/lift selector in the drive position, engag-

ing the interlock and moving the joystick, releases the

brakes.

Operating Controls

With the aerial platform stowed, test the operation of each

control from the upper control station (refer to Figure 8.20).

Figure 8.20 – Upper Controls

Place the battery disconnect switch in the on position

and from the lower controls, place the control selector

upward in the upper controls position. Pull the emergency

stop button outward to turn on the electrical power to the

upper controls.

From the upper controls, test the interlock by moving the

joystick without engaging the interlock switch. If move-

ment occurs the interlock is not functioning properly. Do

not operate the machine until the problem is corrected.

Place the drive/lift selector switch in the drive position

and test the operation of the joystick in both directions.

The lift functions should not operate with the selector in

the drive position.

Place the drive/lift selector switch in the lift position and

test the operation of the joystick in both directions. The

drive functions should not operate with the selector in the

lift position.

Emergency Stop

Push the emergency stop button in to turn off the electri-

cal power. The upper control functions should not oper-

ate with the emergency stop in this position.

Horn

Press the horn button to ensure that the horn operates

properly.

Handle

Steer Switch

Drive Range Switch

Interlock Switch

Drive/Lift Selector Switch

Emergency

Stop Button

Joystick

Horn

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Snorkel S3246 CE Bedienungsanleitung Seite 31

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Spezialmaschinen Snorkel S3246 CE